Desoldering

While being able to make good solder joints is very important, another skill that can be equally important is knowing how to de-solder well. Every electronic project will have one problem or another and often this will involve de-soldering a joint. It could be that a wrong component has been used, the circuit needs changing, or a soldered joint is not satisfactory. If any de-soldering is not done well, then it can damage a printed circuit board or components, leading to costly or time consuming rebuild.

De-soldering a joint may not be easy. Coupled to this, if heat is applied to the joint for too long, it is likely to damage the printed circuit board, if one is used, or it can easily damage a component. It is therefore necessary to tackle any jobs with care, and by using the right tools.

Solder pumps

The main tool used for de-soldering is a form of suction pump. Commercial de-soldering stations have a foot operated electrical pump, but for most home enthusiasts, this will be far too expensive. Instead a spring loaded pump is used. These de-soldering tools are spring loaded and have a plunger that is pushed in to "load" it. A small button is pressed to released the plunger which then draws in air through a small PTFE nozzle. The suction this causes is sufficient to suck the solder off the joint. As a result these tools are often called solder suckers.

Even though the nozzles of these pumps are made from PTFE, they still need replacing from time to time. Additionally the pumps need to be cleaned as they draw in the solder each time. Occasionally it is also necessary to clear the nozzles as these can become blocked with solder. When this occurs the action of the pump is greatly reduced.

The big drawback of these pumps is that they have a recoil. As the plunger moves in one direction, there is a tendency for the rest of the pump to move in the other. This can sometimes knock or jolt the work piece. It also can make it slightly difficult to keep the pump in the correct place so that it can remove all the solder.